Perform a pre-use inspection before operating the xFlex scissor lift . Check the platform, guardrails, tires, controls, emergency lowering system, battery charge, hydraulic components, safety devices, and the surrounding work area for potential hazards.

Inspect the machine for visible damage, hydraulic leaks, loose components, damaged guardrails, tire problems, control issues, or warning indicators. Confirm that all required safety systems operate correctly before raising the platform.

Some xFlex scissor lift models are designed for outdoor operation. Always check the specific model specifications, approved surface conditions, wind limits, ground stability, slope rating, tire type, and manufacturer requirements before working outdoors.

Inspect the scissor arms, pivot points, pins, platform, guardrails, entry gate, hydraulic cylinders, hoses, and visible structural components for damage, excessive wear, leaks, loose parts, or unusual movement.

Check the platform's rated load capacity and include the combined weight of operators, tools, materials, and equipment. Never exceed the manufacturer's stated platform capacity or maximum number of occupants.

Test the platform controls, ground controls, lift and lower functions, drive controls, steering, brakes, emergency stop, horn, alarms, emergency lowering system, and other required safety functions before operation.

Keep tools and materials evenly distributed across the platform and within the rated capacity. Avoid placing heavy loads on one side, blocking platform access, or allowing materials to extend dangerously beyond the guardrails.

Required protective equipment depends on the worksite, machine type, task, and local safety requirements. Operators should follow workplace procedures, manufacturer instructions, and applicable requirements for personal protective equipment.

Battery runtime varies depending on battery capacity, battery condition, machine model, lifting frequency, drive distance, platform load, temperature, charging habits, and the intensity of daily operation.

Stop using the scissor lift and report the issue according to workplace procedures. Any problem that could affect safe operation should be properly inspected and repaired before the machine is returned to service.

A pre-use inspection should be completed before normal operation. Scheduled maintenance and more detailed inspections should follow the manufacturer's recommended service intervals and applicable workplace procedures.

A checklist helps create a consistent inspection process and reminds operators to review the platform, guardrails, battery, tires, controls, hydraulic system, scissor mechanism, emergency systems, and other important machine components.